WEEK 10 (FYP2)- WIRING THE HARDWARE PROTOTYPE TO THE BIKE

Objective:

1) To wiring the hardware prototype to the bike.

Analysis/Discussion:

During week 10 basically after doing some research about bike wiring, I'm doing the wiring connection between my hardware prototype into my bike. After that, test and troubleshoot the wiring connection if function or not.While during the wiring connection, there were some problem occurred such as integrated circuit (IC) PIC 16F877A burned and the bike still can be function even though the key in password is wrong.  

Figure 1

Figure 2

Figure 3

Conclusion:

The process of combining hardware prototype to the bike is not easy as I thought where some problem occurred during the process. The process continued until week 11.