WEEK 8(FYP2)- FINAL YEAR PROJECT  2 BRIEFING FOR 1ST TIME

Objective:

1) To attend Final Year Project 2 briefing.
2) To build the new hardware prototype for this project.

Analysis/Discussion:

    During week 8 basically has attend the Final Year Project 2 briefing then continue by doing the new hardware prototype for this project. I only to buy a prospect item at signboard shop for the new hardware prototype for this project. The other items such as cordless drill, glue gun, and others have already. So, the new hardware prototype for this project can be build by measure the dimension of the complete circuit at first step. Then, to cut the prospect according to the size of the measured to build the new hardware prototype.The dimension that use to build the new hardware prototype for this project about the 20 cm wide x 24 cm length x 11 cm height.  After that, glue all prospect that cut become a rectangular box by using the glue gun. Then, the complete circuit will be located at the base surface of the box while only keypad, led and lcd are located at the upper surface of the box to display them.

Figure 1 : The hardware prototype for this project

 Conclusion:

         Finally,the new hardware prototype for this project was built. The new hardware prototype look very nicely, small and so compact compare with the old hardware prototype. So, the hardware prototype can be connected to the motorcycle after this.